Install Oracle Software in silent mode 11gR2 (11.2.0.3)
1. Overview
2. Unzip software
3. Backup response file
4. Modify the response file
5. Install oracle software in Silent mode
Pre-requisites already been taken care like kernel parameters, add groups, profile and etc
Usually to install 11.2.0.3 database software we will use ./runInstaller graphical user interface. Some times may not have access to a graphical user interface. Silent mode installation allows to configure necessary Oracle components without using graphical interface In this case response file can be used to provide all the required information for the installation, so no additional user input is required.
[oracle@rac2 share]$ unzip database.zip
[oracle@rac2 share]$ cd database [oracle@rac2 database]$ ls -ltr total 64 -rw-r--r-- 1 oracle oinstall 5466 Aug 23 2011 welcome.html -rw-r--r-- 1 oracle oinstall 3226 Sep 22 2011 runInstaller -rw-r--r-- 1 oracle oinstall 28122 Sep 22 2011 readme.html drwxr-xr-x 12 oracle oinstall 4096 Jan 6 2014 doc drwxr-xr-x 2 oracle oinstall 4096 Jan 6 2014 sshsetup drwxr-xr-x 2 oracle oinstall 4096 Jan 6 2014 rpm drwxr-xr-x 2 oracle oinstall 4096 Jan 6 2014 response drwxr-xr-x 4 oracle oinstall 4096 Jan 6 2014 install drwxr-xr-x 14 oracle oinstall 4096 Jan 6 2014 stage [oracle@rac2 database]$ cd response/ [oracle@rac2 response]$ ls -ltr total 80 -rw-r--r-- 1 oracle oinstall 5871 Sep 22 2011 netca.rsp -rw-r--r-- 1 oracle oinstall 24992 Sep 22 2011 db_install.rsp <---- -rw-r--r-- 1 oracle oinstall 44533 Sep 22 2011 dbca.rsp [oracle@rac2 response]$ cp db_install.rsp db_install.rsp.bkp <-----
File name: db_install.rsp [oracle@rac2 response]$ cat db_install.rsp #################################################################### ## Copyright(c) Oracle Corporation 1998,2011. All rights reserved.## ## ## ## Specify values for the variables listed below to customize ## ## your installation. ## ## ## ## Each variable is associated with a comment. The comment ## ## can help to populate the variables with the appropriate ## ## values. ## ## ## ## IMPORTANT NOTE: This file contains plain text passwords and ## ## should be secured to have read permission only by oracle user ## ## or db administrator who owns this installation. ## ## ## #################################################################### #------------------------------------------------------------------------------ # Do not change the following system generated value. #------------------------------------------------------------------------------ oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v11_2_0 #------------------------------------------------------------------------------ # Specify the installation option. # It can be one of the following: # 1. INSTALL_DB_SWONLY # 2. INSTALL_DB_AND_CONFIG # 3. UPGRADE_DB #------------------------------------------------------------------------------- oracle.install.option=INSTALL_DB_SWONLY #------------------------------------------------------------------------------- # Specify the hostname of the system as set during the install. It can be used # to force the installation to use an alternative hostname rather than using the # first hostname found on the system. (e.g., for systems with multiple hostnames # and network interfaces) #------------------------------------------------------------------------------- ORACLE_HOSTNAME=rac2.rajasekhar.com #------------------------------------------------------------------------------- # Specify the Unix group to be set for the inventory directory. #------------------------------------------------------------------------------- UNIX_GROUP_NAME=oinstall #------------------------------------------------------------------------------- # Specify the location which holds the inventory files. # This is an optional parameter if installing on # Windows based Operating System. #------------------------------------------------------------------------------- INVENTORY_LOCATION=/u01/app/oraInventory #------------------------------------------------------------------------------- # Specify the languages in which the components will be installed. # # en : English ja : Japanese # fr : French ko : Korean # ar : Arabic es : Latin American Spanish # bn : Bengali lv : Latvian # pt_BR: Brazilian Portuguese lt : Lithuanian # bg : Bulgarian ms : Malay # fr_CA: Canadian French es_MX: Mexican Spanish # ca : Catalan no : Norwegian # hr : Croatian pl : Polish # cs : Czech pt : Portuguese # da : Danish ro : Romanian # nl : Dutch ru : Russian # ar_EG: Egyptian zh_CN: Simplified Chinese # en_GB: English (Great Britain) sk : Slovak # et : Estonian sl : Slovenian # fi : Finnish es_ES: Spanish # de : German sv : Swedish # el : Greek th : Thai # iw : Hebrew zh_TW: Traditional Chinese # hu : Hungarian tr : Turkish # is : Icelandic uk : Ukrainian # in : Indonesian vi : Vietnamese # it : Italian # # all_langs : All languages # # Specify value as the following to select any of the languages. # Example : SELECTED_LANGUAGES=en,fr,ja # # Specify value as the following to select all the languages. # Example : SELECTED_LANGUAGES=all_langs #------------------------------------------------------------------------------ SELECTED_LANGUAGES=en #------------------------------------------------------------------------------ # Specify the complete path of the Oracle Home. #------------------------------------------------------------------------------ ORACLE_HOME=/u01/app/oracle/product/11.2.0.3/db_1 #------------------------------------------------------------------------------ # Specify the complete path of the Oracle Base. #------------------------------------------------------------------------------ ORACLE_BASE=/u01/app/oracle #------------------------------------------------------------------------------ # Specify the installation edition of the component. # # The value should contain only one of these choices. # EE : Enterprise Edition # SE : Standard Edition # SEONE : Standard Edition One # PE : Personal Edition (WINDOWS ONLY) #------------------------------------------------------------------------------ oracle.install.db.InstallEdition=EE #------------------------------------------------------------------------------ # This variable is used to enable or disable custom install and is considered # only if InstallEdition is EE. # # true : Components mentioned as part of 'optionalComponents' property # are considered for install. # false : Value for 'optionalComponents' is not considered. #------------------------------------------------------------------------------ oracle.install.db.EEOptionsSelection=false <-- if you need below components then set as true #------------------------------------------------------------------------------ # This variable is considered only if 'EEOptionsSelection' is set to true. # # Description: List of Enterprise Edition Options you would like to enable. # # The following choices are available. You may specify any # combination of these choices. The components you choose should # be specified in the form "internal-component-name:version" # Below is a list of components you may specify to enable. # # oracle.oraolap:11.2.0.3.0 - Oracle OLAP # oracle.rdbms.dm:11.2.0.3.0 - Oracle Data Mining # oracle.rdbms.dv:11.2.0.3.0 - Oracle Database Vault # oracle.rdbms.lbac:11.2.0.3.0 - Oracle Label Security # oracle.rdbms.partitioning:11.2.0.3.0 - Oracle Partitioning # oracle.rdbms.rat:11.2.0.3.0 - Oracle Real Application Testing #------------------------------------------------------------------------------ oracle.install.db.optionalComponents=oracle.rdbms.partitioning:11.2.0.3.0,oracle.oraolap:11.2.0.3.0,oracle.rdbms.dm:11.2.0.3.0,oracle.rdbms.dv:11.2.0.3.0,oracle.rdbms.lbac:11.2.0.3.0,oracle.rdbms.rat:11.2.0.3.0 ############################################################################### # # # PRIVILEGED OPERATING SYSTEM GROUPS # # ------------------------------------------ # # Provide values for the OS groups to which OSDBA and OSOPER privileges # # needs to be granted. If the install is being performed as a member of the # # group "dba", then that will be used unless specified otherwise below. # # # # The value to be specified for OSDBA and OSOPER group is only for UNIX based # # Operating System. # # # ############################################################################### #------------------------------------------------------------------------------ # The DBA_GROUP is the OS group which is to be granted OSDBA privileges. #------------------------------------------------------------------------------ oracle.install.db.DBA_GROUP=dba #------------------------------------------------------------------------------ # The OPER_GROUP is the OS group which is to be granted OSOPER privileges. # The value to be specified for OSOPER group is optional. #------------------------------------------------------------------------------ oracle.install.db.OPER_GROUP= #------------------------------------------------------------------------------ # Specify the cluster node names selected during the installation. # Example : oracle.install.db.CLUSTER_NODES=node1,node2 #------------------------------------------------------------------------------ oracle.install.db.CLUSTER_NODES= #------------------------------------------------------------------------------ # This variable is used to enable or disable RAC One Node install. # # true : Value of RAC One Node service name is used. # false : Value of RAC One Node service name is not used. # # If left blank, it will be assumed to be false #------------------------------------------------------------------------------ oracle.install.db.isRACOneInstall= #------------------------------------------------------------------------------ # Specify the name for RAC One Node Service. #------------------------------------------------------------------------------ oracle.install.db.racOneServiceName= #------------------------------------------------------------------------------ # Specify the type of database to create. # It can be one of the following: # - GENERAL_PURPOSE/TRANSACTION_PROCESSING # - DATA_WAREHOUSE #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.type= #------------------------------------------------------------------------------ # Specify the Starter Database Global Database Name. #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.globalDBName= #------------------------------------------------------------------------------ # Specify the Starter Database SID. #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.SID= #------------------------------------------------------------------------------ # Specify the Starter Database character set. # # It can be one of the following: # AL32UTF8, WE8ISO8859P15, WE8MSWIN1252, EE8ISO8859P2, # EE8MSWIN1250, NE8ISO8859P10, NEE8ISO8859P4, BLT8MSWIN1257, # BLT8ISO8859P13, CL8ISO8859P5, CL8MSWIN1251, AR8ISO8859P6, # AR8MSWIN1256, EL8ISO8859P7, EL8MSWIN1253, IW8ISO8859P8, # IW8MSWIN1255, JA16EUC, JA16EUCTILDE, JA16SJIS, JA16SJISTILDE, # KO16MSWIN949, ZHS16GBK, TH8TISASCII, ZHT32EUC, ZHT16MSWIN950, # ZHT16HKSCS, WE8ISO8859P9, TR8MSWIN1254, VN8MSWIN1258 #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.characterSet=AL32UTF8 #------------------------------------------------------------------------------ # This variable should be set to true if Automatic Memory Management # in Database is desired. # If Automatic Memory Management is not desired, and memory allocation # is to be done manually, then set it to false. #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.memoryOption=true #------------------------------------------------------------------------------ # Specify the total memory allocation for the database. Value(in MB) should be # at least 256 MB, and should not exceed the total physical memory available # on the system. # Example: oracle.install.db.config.starterdb.memoryLimit=512 #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.memoryLimit= #------------------------------------------------------------------------------ # This variable controls whether to load Example Schemas onto # the starter database or not. #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.installExampleSchemas=false #------------------------------------------------------------------------------ # This variable includes enabling audit settings, configuring password profiles # and revoking some grants to public. These settings are provided by default. # These settings may also be disabled. #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.enableSecuritySettings=true ############################################################################### # # # Passwords can be supplied for the following four schemas in the # # starter database: # # SYS # # SYSTEM # # SYSMAN (used by Enterprise Manager) # # DBSNMP (used by Enterprise Manager) # # # # Same password can be used for all accounts (not recommended) # # or different passwords for each account can be provided (recommended) # # # ############################################################################### #------------------------------------------------------------------------------ # This variable holds the password that is to be used for all schemas in the # starter database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.ALL= #------------------------------------------------------------------------------- # Specify the SYS password for the starter database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.SYS= #------------------------------------------------------------------------------- # Specify the SYSTEM password for the starter database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.SYSTEM= #------------------------------------------------------------------------------- # Specify the SYSMAN password for the starter database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.SYSMAN= #------------------------------------------------------------------------------- # Specify the DBSNMP password for the starter database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.DBSNMP= #------------------------------------------------------------------------------- # Specify the management option to be selected for the starter database. # It can be one of the following: # 1. GRID_CONTROL # 2. DB_CONTROL #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.control=DB_CONTROL #------------------------------------------------------------------------------- # Specify the Management Service to use if Grid Control is selected to manage # the database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.gridcontrol.gridControlServiceURL= ############################################################################### # # # SPECIFY BACKUP AND RECOVERY OPTIONS # # ------------------------------------ # # Out-of-box backup and recovery options for the database can be mentioned # # using the entries below. # # # ############################################################################### #------------------------------------------------------------------------------ # This variable is to be set to false if automated backup is not required. Else # this can be set to true. #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.automatedBackup.enable=false #------------------------------------------------------------------------------ # Regardless of the type of storage that is chosen for backup and recovery, if # automated backups are enabled, a job will be scheduled to run daily to backup # the database. This job will run as the operating system user that is # specified in this variable. #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.automatedBackup.osuid= #------------------------------------------------------------------------------- # Regardless of the type of storage that is chosen for backup and recovery, if # automated backups are enabled, a job will be scheduled to run daily to backup # the database. This job will run as the operating system user specified by the # above entry. The following entry stores the password for the above operating # system user. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.automatedBackup.ospwd= #------------------------------------------------------------------------------- # Specify the type of storage to use for the database. # It can be one of the following: # - FILE_SYSTEM_STORAGE # - ASM_STORAGE #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.storageType= #------------------------------------------------------------------------------- # Specify the database file location which is a directory for datafiles, control # files, redo logs. # # Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.fileSystemStorage.dataLocation= #------------------------------------------------------------------------------- # Specify the backup and recovery location. # # Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation= #------------------------------------------------------------------------------- # Specify the existing ASM disk groups to be used for storage. # # Applicable only when oracle.install.db.config.starterdb.storage=ASM_STORAGE #------------------------------------------------------------------------------- oracle.install.db.config.asm.diskGroup= #------------------------------------------------------------------------------- # Specify the password for ASMSNMP user of the ASM instance. # # Applicable only when oracle.install.db.config.starterdb.storage=ASM_STORAGE #------------------------------------------------------------------------------- oracle.install.db.config.asm.ASMSNMPPassword= #------------------------------------------------------------------------------ # Specify the My Oracle Support Account Username. # # Example : MYORACLESUPPORT_USERNAME=abc@oracle.com #------------------------------------------------------------------------------ MYORACLESUPPORT_USERNAME= #------------------------------------------------------------------------------ # Specify the My Oracle Support Account Username password. # # Example : MYORACLESUPPORT_PASSWORD=password #------------------------------------------------------------------------------ MYORACLESUPPORT_PASSWORD= #------------------------------------------------------------------------------ # Specify whether to enable the user to set the password for # My Oracle Support credentials. The value can be either true or false. # If left blank it will be assumed to be false. # # Example : SECURITY_UPDATES_VIA_MYORACLESUPPORT=true #------------------------------------------------------------------------------ SECURITY_UPDATES_VIA_MYORACLESUPPORT=false #------------------------------------------------------------------------------ # Specify whether user doesn't want to configure Security Updates. # The value for this variable should be true if you don't want to configure # Security Updates, false otherwise. # # The value can be either true or false. If left blank it will be assumed # to be false. # # Example : DECLINE_SECURITY_UPDATES=false #------------------------------------------------------------------------------ DECLINE_SECURITY_UPDATES=true #------------------------------------------------------------------------------ # Specify the Proxy server name. Length should be greater than zero. # # Example : PROXY_HOST=proxy.domain.com #------------------------------------------------------------------------------ PROXY_HOST= #------------------------------------------------------------------------------ # Specify the proxy port number. Should be Numeric and atleast 2 chars. # # Example : PROXY_PORT=25 #------------------------------------------------------------------------------ PROXY_PORT= #------------------------------------------------------------------------------ # Specify the proxy user name. Leave PROXY_USER and PROXY_PWD # blank if your proxy server requires no authentication. # # Example : PROXY_USER=username #------------------------------------------------------------------------------ PROXY_USER= #------------------------------------------------------------------------------ # Specify the proxy password. Leave PROXY_USER and PROXY_PWD # blank if your proxy server requires no authentication. # # Example : PROXY_PWD=password #------------------------------------------------------------------------------ PROXY_PWD= #------------------------------------------------------------------------------ # Specify the proxy realm. This value is used if auto-updates option is selected. # # Example : PROXY_REALM=metalink #------------------------------------------------------------------------------ PROXY_REALM= #------------------------------------------------------------------------------ # Specify the Oracle Support Hub URL. # # Example : COLLECTOR_SUPPORTHUB_URL=https://orasupporthub.company.com:8080/ #------------------------------------------------------------------------------ COLLECTOR_SUPPORTHUB_URL= #------------------------------------------------------------------------------ # Specify the auto-updates option. It can be one of the following: # a.MYORACLESUPPORT_DOWNLOAD # b.OFFLINE_UPDATES # c.SKIP_UPDATES #------------------------------------------------------------------------------ oracle.installer.autoupdates.option= #------------------------------------------------------------------------------ # In case MYORACLESUPPORT_DOWNLOAD option is chosen, specify the location where # the updates are to be downloaded. # In case OFFLINE_UPDATES option is chosen, specify the location where the updates # are present. oracle.installer.autoupdates.downloadUpdatesLoc= #------------------------------------------------------------------------------ # Specify the My Oracle Support Account Username which has the patches download privileges # to be used for software updates. # Example : AUTOUPDATES_MYORACLESUPPORT_USERNAME=abc@oracle.com #------------------------------------------------------------------------------ AUTOUPDATES_MYORACLESUPPORT_USERNAME= #------------------------------------------------------------------------------ # Specify the My Oracle Support Account Username password which has the patches download privileges # to be used for software updates. # # Example : AUTOUPDATES_MYORACLESUPPORT_PASSWORD=password #------------------------------------------------------------------------------ AUTOUPDATES_MYORACLESUPPORT_PASSWORD= [oracle@rac2 response]$
5. Install oracle software in Silent mode
[oracle@rac2 database]$ ./runInstaller -ignoreSysPrereqs -showProgress -silent -responseFile /u01/share/database/response/db_install.rsp Starting Oracle Universal Installer... Checking Temp space: must be greater than 120 MB. Actual 5255 MB Passed Checking swap space: must be greater than 150 MB. Actual 5671 MB Passed Preparing to launch Oracle Universal Installer from /tmp/OraInstall2016-12-21_07-56-03PM. Please wait ...[oracle@rac2 database]$ [WARNING] [INS-13014] Target environment do not meet some optional requirements. CAUSE: Some of the optional prerequisites are not met. See logs for details. /u01/app/oraInventory/logs/installActions2016-12-21_07-56-03PM.log ACTION: Identify the list of failed prerequisite checks from the log: /u01/app/oraInventory/logs/installActions2016-12-21_07-56-03PM.log. Then either from the log file or from installation manual find the appropriate configuration to meet the prerequisites and fix it manually. You can find the log of this install session at: /u01/app/oraInventory/logs/installActions2016-12-21_07-56-03PM.log Prepare in progress. .................................................. 9% Done. Prepare successful. Copy files in progress. .................................................. 14% Done. .................................................. 20% Done. .................................................. 26% Done. .................................................. 31% Done. .................................................. 36% Done. .................................................. 44% Done. .................................................. 49% Done. .................................................. 55% Done. .................................................. 63% Done. .................................................. 68% Done. .................................................. 73% Done. .................................................. 78% Done. .................................................. 83% Done. .............................. Copy files successful. Link binaries in progress. .......... Link binaries successful. Setup files in progress. .................................................. 88% Done. .................................................. 94% Done. Setup files successful. The installation of Oracle Database 11g was successful. Please check '/u01/app/oraInventory/logs/silentInstall2016-12-21_07-56-03PM.log' for more details. Execute Root Scripts in progress. As a root user, execute the following script(s): 1. /u01/app/oracle/product/11.2.0.3/db_1/root.sh .................................................. 100% Done. Execute Root Scripts successful. Successfully Setup Software. [oracle@rac2 database]$ open another terminal as root and execute and then only hit enter on first terminal where we ran runInstaller # /u01/app/oracle/product/11.2.0.3/db_1/root.sh <---- Once the root scripts are run as instructed, the installation is complete.
Caution: Your use of any information or materials on this website is entirely at your own risk. It is provided for educational purposes only. It has been tested internally, however, we do not guarantee that it will work for you. Ensure that you run it in your test environment before using.
Thank you,
Rajasekhar